分类
信息技术

Set up Ubuntu 12.04 Laptop as WiFi Hotspot (ad-hoc) to Share Wired Internet

The post has been moved to https://www.inksay.com/set-up-ubuntu-12-04-laptop-as-wifi-hotspot-ad-hoc-to-share-wired-internet/, sorry for the inconvenience.

“Set up Ubuntu 12.04 Laptop as WiFi Hotspot (ad-hoc) to Share Wired Internet”上的86条回复

原来U也这么漂亮。关于Mac热点没置我研究了好一阵子才搞掂的,现在屋子里的所有设备都用我的信号了。

ipad输入真要命!

请问下,我按照这样步骤建热点,但是当我create new wireless net work的时候 他提示 wireless network disconnect ,我查了好多资料,不知道是什么原因?

估计是在学校被drcom 坑了 。。。唉 在win7 下可以用connectfy软件共享 但是在ubuntu下就无力了。。。

很不错的博客呢 第二次通过搜索访问了:)
原来先前一直没有找到shared to other computer这个选项 所以没有成功

In step 3 – On choosing “WEP 40/128-bit Key (Hex or ASCII)” the ‘Save’ button is getting disabled. Any idea why?? And how to deal with the situation?

Sorry, I have not experienced this sort of problem. You can also try another more direct method, I remember it is just one-step setting somewhere, you can Google it. Or just buy a wifi router. Good luck.

The key lengths have to be certain sizes. If you have not typed enough characters, or type too many, the save button will grey out.

怎么我的ubuntu ad-hoc不设密码 android手机才能连接上网
安全性那设密码就不行 手机无线连接显示已停用!!求解

when i click on my hotspot its giving “hotspot established ” but none of the phone/laptop is detecting its wifi…plz help me out..

Thanks so much! I spent ages trying to do the way more confusing method of using hostapd through terminal and it didn’t work. I was just thinking about turning back to Windows so I could use connectify but your method works perfectly!
🙂

Wifi seems up, but iPhone cannot connect

Followed every steps and saw the hot spot on iPhone. When connecting, it asks me not only a password but also a username…. I think I typed the correct password (tried several times) and tried various usernames – leave blank; my ubuntu login; it just keep saying “unable to join”; any idea?

Oh, forgot to mention, you can also tweak your ubuntu instead your phones. Bear that this is, of course, useless if you want to use computers without root users.

FIRST:
sudo apt-get install dhcp3-server hostapd

SECOND:
open a text editor and save this to your home folder as .hostapd.conf

interface=*YOUR*WIRELESS*CARD*ex:wlan0,eth1,etc*SEE*NOTE*
driver=nl80211
ssid=*YOUR*SSID*A.K.A*HOTSPOT*NAME
hw_mode=g
channel=11
wpa=1
wpa_passphrase=*YOUR*PASSWORD*
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
wpa_ptk_rekey=600

*NOTE: run iwconfig and you’ll see something such as:
ppp0 no wireless extensions.
lo no wireless extensions.
wlan1 IEEE 802.11bg Mode:Master Frequency:2.462 GHz Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
wlan1 is the wireless interface.

THIRD:
Run the wireless hotspot tutorial created by 土木坛子, which is the tutorial on this page. Then, run
sudo hostapd .hostapd.conf

And that’s it. Connect your android phone, normal way of course. 🙂
If you are able to detect it but unable to join the network, do not fill the wireless security/password while running 土木坛子’s tutorial. Leave it blank instead, and fill only the .hostapd.conf’s password (wpa_passphrase=*YOUR*PASSWORD*).

Hello, Tumutanzi. I follow this tutorial until the point 8. Yes I have created that in my machine. But:

1) Should I click on the new wifi I create? Its name is Malsasa.
2) If I click that, still I can browsing or not? Or just client that can browse and I can’t?
3) After doing this tutorial, my wifi detected on another Ubuntu laptops but after enter password, the laptops only searching and do not connected into my wifi.

I am new in network and in Linux. I need your help. I am using Haier modem for connecting to Internet, not a wired connection. Thank you from Indonesia.

I think you misunderstand this tutorial. First, you should make your laptop (has wifi modem) connect internet with cable using Ubuntu, then you use the wifi modem to share the internet with your wifi enabled devices, and I am not sure the tutorial works for all devices, since the hardware is also very complicated, that is why I list the hardware info I used.

As for questions

1, yes, you should click it.
2, you can surf the internet on your laptop and on your mobile devices.
3, the length of password should be set according the tutorial.

Wow! So fast replying! Thank you.

So, for USB modem connection, in Ubuntu, I can’t do sharing like this tutorial? I don’t have any wired connection and any wifi modem. Just Haier EC1261-2 USB Modem and Ubuntu 12.04. My laptop is ASUS X44C and wireless card kernel driver is ath9k.

I like your fast reply 🙂 Thank you.

In this case, theoretically speaking, it is possible, because that the key point is that the WIFI modem of your laptop works either for your laptop or for your mobile devices.
But practically speaking, I have never tried, so I have no further idea, you should try it yourself, and I would like to know whether you succeed.
You are welcome.

Oh again, after step 8, my network manager always changing and changing, keep changing between mobile network icon and monitor icon. And also OSD notification appear again and again saying

Malsasa
Disconnected

Thank you for helping me.

Oh, yeah. If you reply this comment, please send a notification to my mail. I need it soon but your blog seems doesn’t have any mail subscription for comment. Thank you, Tumutanzi 🙂 It is my first time to come in China Linux Blog.

Antony进行回复 取消回复

您的电子邮箱地址不会被公开。 必填项已用*标注